The Impact of Methods of Forming on the Mechanical Properties of Fiber-reinforced Polymer-matrix Composite Materials
Abstract
Keywords: |
Composite; fibrous composite materials; forming; strength; technology
|
Full Text: |
References
J. Aboudi, “Micromechanical characterization of the non-linear viscoelastic behavior of resin matrix composites,” Composites Science and Technology, vol. 38, pp. 371-386, 1990.
A. F. Avila, M. L. Soares and A. S. Neto, “A study on nanostructured laminated plates behavior under low velocity impact loading,” International Journal of impact Engineering, vol. 34, pp. 28-41, 2007. http://dx.doi.org/10.1016/j.ijimpeng.2006.06.009
J. M. Whitney, Fatigue characterization of composite materials. Fatigue of fibrous composite materials, ASTM STP 723, American Society for Testing and Materials, 1981, pp. 133-151. http://dx.doi.org/10.1520/STP27618S
L. G. Zhao, N.A. Warrior, and A.C. Long. “A thermo-viscoelastic analysis of process- induced residual stress in fiber-reinforced polymer-matrix composites,” Materials Science and Engineering, vol. 452-453, pp. 483-498, 2007. http://dx.doi.org/10.1016/j.msea.2006.10.060
D. G. Yang, K. M. B. Jansen, L. J. Ernst, G. Q. Zhang, W. D. Van Drel, H. J. L. Bressers, and J.H.J.Janssen, “Numerical modeling of warpage induced in QFN array molding process,” Microelectronics Reliability, no. 47, pp. 310-318, 2007. http://dx.doi.org/10.1016/j.microrel.2006.09.036
S. S. Wang and E. S.Chim, “Fatigue damage and degradation in random short - fiber SMC composite,” Journal of Composite Materials, vol. 17, No. 2, pp. 114-134, 1983. http://dx.doi.org/10.1177/002199838301700203
J. N. Yang and M. D. Liu, “Residual strength degradation model and theory of periodic proof tests for graphite/epoxy laminates,” Journal of Composite Materials, vol. 11, no. 11, pp. 176-203, 1977. http://dx.doi.org/10.1177/002199837701100205
A. K. Majmeister, V. P. Tamuz, G. A. Teters. Soprotivlenie polimernyh i kompozitnyh materialov. Riga: Zinatne, 1980, p. 572.
P. S. Abolins, “Tenzor podatlivosti odnonapravlennogo armirovannogo uprugogo materiala,” Mehanika Polimerov, vol. 4, pp. 52-59, 1965.
A. P. Wilczyński and M. Klasztorny, “Determination of complex compliances of fibrous polymeric composites,” Journal of Composite Materials, vol. 34, No. 1, pp. 2-26, 2000. http://dx.doi.org/10.1177/002199830003400101
J. German, Podstawy mechaniki kompozytów włóknistych. Kraków: Wydawnictwo Politechniki Krakowskiej, 1996, p. 282.
R. Chatys, „Weryfikacja modeli homogenizacji określających właściwości mechaniczne laminatu przy cięciu strumieniem wody,” Technical Transaction PK „Mechanics” vol. 1, pp.61-65, 2009.
K. Piernik, „Modelowanie właściwości mechanicznych kompozytów włóknistych o osnowie polimerowej poprzez jakość i dobór technologii formowania,” Praca magisterska PŚk., Kielce, 2014.
Milar. “Materiały do produkcji kompozytów”. [Online]. Available: www.milar.pl [Accessed: March 05, 2015].
W. Królikowski, Polimerowe kompozyty konstrukcyjne poliestrowe. Warszawa: WNT 2012, p. 327.
R. Chatys, „Mechanical Properties of Polymer Composites Produced by Resin Injection Molding for Applications Under Increased Demands for Quality and Repeatability,” Journal of Ultrasound, vol. 64, no. 2, pp. 35-38, 2009.
R. Chatys, “Modeling of Mechanical Properties with the Increasing Demands in The Range of Qualities and Repeatability of Polymers Composites Elements,” Monograph „Polymers and Constructional Composites,” Gliwice, pp. 36-47, 2008.
DOI: 10.1515/tae-2015-0001
Refbacks
- There are currently no refbacks.
Copyright (c) 2015 Krzysztof Piernik, Irena Chatys, Rafał Chatys
This work is licensed under a Creative Commons Attribution 4.0 International License.