Indication of the Destruction Stage of Epoxy PES-Filled Composite Using the Connected Parameter of Acoustic Emission Rate and the Spectral Characteristics of AE Signals
Abstract
Keywords: |
Acoustic emission method; non-destructive testing; multiparameter acoustic emission analysis; polyethersulfone composite
|
Full Text: |
References
C. U. Grosse and M. Ohtsu, Acoustic Emission Testing. Springer, 2008, p. V. https://doi.org/10.1007/978-3-540-69972-9
H. M. Sowards, Analog synthesis. DigitalRedux, 2007.
A. Cockerill, K. M. Holford, T. P. Bradshaw, and A. Clarke, “Use of high frequency analysis of acoustic emission signals to determine rolling element bearing condition,” Journal of Physics Conference Series, vol. 628, no. 1, pp. 4, July 2015. https://doi.org/10.1088/1742-6596/628/1/012074
T. M. Morton, R. M. Harrington, and J. G. Bjeletich, “Acoustic emissions of fatigue crack growth,” Engineering Fracture Mechanics, vol. 5, pp. 691–697, 1973. https://doi.org/10.1016/0013-7944(73)90047-7
T. C. Lindley, I. G. Palmer, and C. E. Richards, “Acoustic emission monitoring of fatigue crack growth,” Materials Science and Engineering, vol. 32, pp. 1–15, 1978. https://doi.org/10.1016/0025-5416(78)90206-9
Z. F. Wang, J. Li, W. Ke, and Z. Zhu, “Characteristics of acoustic emission for A537 structural steel during fatigue crack propagation,” Scripta Metallurgica et Materialia, vol. 27, no. 5, pp. 641–646, 1992. https://doi.org/10.1016/0956-716X(92)90354-H
M. D. Banov, A. A. Shanyavsky, A. I. Urbakh, D. A. Troenkin, E. A. Konyaev, Y. A. Pykhtin, S. F. Minatsevich, and V. N.Kashin, “Acoustic-emission inspection of the kinetics of fatigue cracks in turbomachinery disks”, The Soviet Journal of Nondestructive Testing, vol. 23, no. 11, 1988, pp. 801–805.
M. D. Banov, E. A. Konyaev, V. P. Pavelko, and A. I. Urbakh, “Determination of the threshold stress intensity factor by the method of acoustic emission”, Strength of Materials, vol. 23, no. 4, 1991, pp. 439–443. https://doi.org/10.1007/BF00771973
M. D. Banov, D. A. Troenkin, A. I. Urbakh, and S. F. Minatsevich, “Inspection of the condition of gas-turbine engine blades by the acoustic-emission method”, The Soviet Journal of Nondestructive Testing, vol. 22, no. 9, 1986, pp. 619–623.
A. A. Shaniavski, A. A. Losev, and M. D. Banov, “Development of fatigue cracking in aircraft engine compressor disks of titanium alloy Ti-6A1-3Mo-2Cr,” Fatigue and Fracture of Engineering Materials and Structures, vol. 31, no. 3, pp. 297–313, 1998. https://doi.org/10.1046/j.1460-2695.1998.00021.x
Z. M. Hussain, A. Z. Sadik, and P. O'Shea, Digital Signal Processing. Berlin: Springer, 2011, p. 15.
Q. Q. Ni, “Wavelet transform of acoustic emission signals in failure of model composites,” Engineering Fracture Mechanics, vol. 69, no. 6, pp. 717–728, 2002. https://doi.org/10.1016/S0013-7944(01)00105-9
C. R. Ramirez-Jimenez, N. Papadakis, N. Reynolds, T. H. Gan, P. Purnell, and M. Pharaoh, “Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event,” Composites Science and Technology, vol. 64, no. 12, pp. 1819–1827, September 2004. https://doi.org/10.1016/j.compscitech.2004.01.008
S. De Sutter, S. Verbruggen, T. Tysmans, and D. G. Aggelis, “Fracture monitoring of lightweight composite-concrete beams,” Composite Structures, vol. 167, no. 1, pp. 11–19, May 2017. https://doi.org/10.1016/j.compstruct.2017.01.024
J. Shiroishi, Y. Li, S. Liang, T. Kurfess, and S. Danyluk, “Bearing condition diagnostics via vibration and acoustic emission measurements,” Mechanical Systems and Signal Processing, vol. 11, no. 5, pp. 693–705, September 1997. https://doi.org/10.1006/mssp.1997.0113
Z. Jian-li and G. Wei-Xing, “Study on the Characteristics of the Leakage Acoustic Emission in Cast Iron Pipe by Experiment,” in First International Conference on Instrumentation, Measurement, Computer, Communication and Control, 2011. https://doi.org/10.1109/IMCCC.2011.39
I. Bashir, J. Walsh, P. R. Thies, S. D. Weller, P. Blondel, and L. Johanning, “Underwater acoustic emission monitoring – Experimental investigations and acoustic signature recognition of synthetic mooring ropes,” Applied Acoustics, vol. 121, no. 1, pp. 95–103, June 2017. https://doi.org/10.1016/j.apacoust.2017.01.033
A. Urbahs, M. Banovs, S. Bratarčuks, P. Serebrjakovs, and V. Turko, “Diagnostics of Damaged Composite Skin Zones of Aircraft after the Impact of Lightning Bolt Using the Method of Acoustic Emission,” in the 16th European Conference on Composite Materials, Seville, ECCM, 2014.
H. Vallen, AE Testing. Fundamentals, Equipment, Applications. Munich: Vallen-Systeme Gmbh, 2002, p. 10.
DOI: 10.1515/tae-2017-0004
Cited-By
1. Effect of Preliminary Cycling on the Acoustic Emission Characteristics of Structural 15Kh2GMF Steel
L. R. Botvina, M. R. Tyutin, A. I. Bolotnikov, T. B. Petersen
Russian Metallurgy (Metally) vol: 2021 issue: 1 first page: 32 year: 2021
doi: 10.1134/S0036029521010043
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 Sergejs Bratarčuks
This work is licensed under a Creative Commons Attribution 4.0 International License.