Turbine Blade of Gas Turbine Engine Additional Unloading by Changing the Layout of the Gravity Centre of the Shroud Shelf
Abstract
Keywords: |
Turbine blade; shroud shelf; blade load removing
|
Full Text: |
References
I. Ozoliņš, Ē. Ozoliņš and V. Fedotova, “Development of a Method for Calculating the Working Blade Stress Profile of the Aviation Gas Turbine Engine for Student Training”. Transport and Aerospace Engineering Journal. vol. 6, no. 1, pp. 55–66, 2018. https://doi.org/10.2478/tae-2018-0007
A. A. Inozemcev and V. L. Sandrackij, Gazoturbinnye dvigateli. OAO Aviadvigatel. Perm, 2006.
R. J. Boyle, L. M. Agricola, A. H. Parikh, A. A. Ameri and V. K. Nagpal. “Shrouded CMC Rotor Blades for High Pressure Turbine Applications”. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. No. GT2018-76827, pp. V02BT41A028; 10 pages. https://doi.org/10.1115/GT2018-76827
Y. Assoul, S. Benbelaid, V. Šijački-Žeravčić, G. Bakić and M. Đukić, “Life Estimation of First Stage High Pressure Gas Turbine Blades”. Scientific Technical Review, vol. LVIII, no. 2, pp. 8–13, 2008.
R. I. Stephens, A. Fatemi, R. R. Stephens and H. O. Fuchs, Metal Fatigue in Engineering. New York, 2001.
Z. Liu, Z. Chen and J. Chen, “The Strength Analysis of CFM56 Engine Blade”. MATEC Web of Conferences (ICMAA), vol. 166, 2018. https://doi.org/10.1051/matecconf/201816604001
V. A. Frolov, V. G. Kocenko and S. B. Luzkov, Raschet lopatok kompressora i turbiny na staticheskuju prochnost i kolebanija. Samara: SGAU, 2000.
M. L. Kuzmenko, V. S. Chigrin and S. E. Belova, Staticeskaja prochnost rabochih lopatok i diskov kompressorov i turbin GTD. Uchebnoe posobie. Rybinsk: RGATA, 2005.
G. S. Skubacevskij, Aviacionnye gazo-turbinnye dvigateli. Konstrukcia i rascet detalej. Moscow: Mashinostroenie, 1981.
B. E. Vasiljev and L. A. Magerramova. “Analiz vlijanija konfiguracii bondaznih polok lopatok turbin perspektivnih dvigatelei na procnostnije harakteristiki”. Vestnik YGATY, 2015.
D. Z. Yu, D. H. Wen and H. R. Zhang, “Structural static analysis of gas turbine blade and disk of an aeroengine”. Structure & Environment Engineering, 2012.
R. Fernandes, S. El-Borgi, K. Ahmed, M. I. Friswell and N. Jamia, “Static fracture and modal analysis simulation of a gas turbine compressor blade and bladed disk system”. Advanced Modeling and Simulation in Engineering Sciences, vol. 3, no. 1, December 2016. https://doi.org/10.1186/s40323-016-0083-7
D. V. Hronina (ed.), Konstrukcia i proektirovanie aviacionnyh gazoturbinnyh dvigatelej. Moscow: Mashinostroenie, 1989.
A. S. Vinogradov and G. Kartashov, Konstruirovanie lopatok i diskov AD i EU. Samara: RIO SGAU, 2007.
N. I. Starcev, Konstrukcia i proektirovanie turbokompressora GTD. Uchebnoe posobie. Samara: RIO SGAU, 2006.
V. F. Haritonov. Materialy detalej aviacionnyh gazoturbinnyh dvigatelej. UFA: UGATU, 2004.
DOI: 10.2478/tae-2019-0002
Cited-By
1. Numerical Study on Vibration Response of Compressor Stator Blade Considering Contact Friction of Holding Ring
Jiaobin Ma, Zhufeng Liu, Di Zhang, Yonghui Xie
Applied Sciences vol: 13 issue: 11 first page: 6380 year: 2023
doi: 10.3390/app13116380
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 Ēriks Ozoliņš, Ilmārs Ozoliņš, Līga Ramāna
This work is licensed under a Creative Commons Attribution 4.0 International License.